⚡ NAPIT Registered  |  📞 07817 171954  |  Rotherham & South Yorkshire

EV Charger Installation in Rotherham

OZEV-approved home and workplace EV chargepoint installers serving Rotherham, Sheffield and South Yorkshire.

Switching to an electric vehicle is one of the best decisions you can make for your wallet and the environment — but charging at a public rapid charger every week quickly gets expensive and inconvenient. A dedicated home charger cuts your cost-per-mile dramatically and means you wake up every morning with a full battery.

MP Electrical & Renewable Energy Ltd are fully qualified, NAPIT-registered EV chargepoint installers based right here in Rotherham. Every installation is carried out to BS 7671:2018+A2:2022 and fully notified under Part P building regulations.

Watch Our EV Charger Installations

See how we install EV chargers for homeowners across Rotherham and South Yorkshire. Every installation is completed to the highest standard with OZEV-approved equipment.

Zappi EV Charger Installation

Rotherham & South Yorkshire

Hypervolt EV Charger Installation

Rotherham & South Yorkshire

A Small Selection of EV Chargers We Install

Rotherham & South Yorkshire

Easee EV Charger Installation

Rotherham & South Yorkshire

Brands We Install

We’re approved to install every major domestic charger on the market, including Zappi (MyEnergi), Ohme, Easee, Wallbox, Hypervolt, EO, Project EV and Rolec. We’ll happily recommend the best unit for your driving pattern, solar setup and requirements rather than pushing a single brand.

What’s Included in a Standard Install

  • Site survey and load assessment of your existing consumer unit
  • Supply and fit of your chosen 7kW tethered or untethered chargepoint
  • Type A RCD or RCBO protection with DC fault detection where required
  • Cable run clipped or in trunking to keep things tidy
  • Earthing upgrade or PEN fault device where needed
  • Commissioning, testing and DNO notification
  • NAPIT electrical installation certificate
Got solar panels? A Zappi or Ohme charger can divert surplus solar straight into your car — effectively giving you free miles. Ask us about pairing your charger with a battery and solar system on our Solar, Battery & EV page.

Frequently Asked Questions

How long does installation take?

A standard install takes 3–5 hours. We aim to have you charging the same day.

Do I need planning permission?

No — domestic EV chargepoints are permitted development in almost all cases.

Is my fuse box compatible?

Older consumer units sometimes need upgrading. We’ll tell you honestly on the survey — see our fuse box upgrade page.

Do you cover my area?

Yes — we cover Rotherham, Sheffield, Doncaster, Barnsley, Wickersley, Maltby, Mexborough and all surrounding villages.

Areas We Cover for EV charger installation

MP Electrical & Renewable Energy Ltd is based in Rotherham and covers the whole of South Yorkshire and the surrounding region. Wherever you are, a local NAPIT-registered electrician is never far away.

Rotherham

Our home town. We cover all S60, S61, S62, S63, S64, S65, S66 postcodes including the town centre, Clifton, Eastwood, Kimberworth, Masbrough, Parkgate, Bramley, Brecks, Herringthorpe, Thrybergh, Dalton and Ravenfield.

Sheffield

Full coverage across S1–S20 including the city centre, Hillsborough, Crookes, Ecclesall, Woodseats, Millhouses, Handsworth, Meadowhall, Attercliffe and Tinsley.

Doncaster

Covering DN1–DN12 and surrounding villages including Bessacarr, Bentley, Balby, Armthorpe, Edenthorpe, Rossington and Thorne.

Barnsley

S70–S75 including Penistone, Hoyland, Wombwell, Darfield, Dodworth and Worsbrough.

Wickersley

S66 including Bramley, Flanderwell, Sunnyside and Listerdale — our busiest local patch.

Maltby

S66 covering Maltby itself plus Hellaby, Braithwell, Micklebring and Stainton.

Mexborough

S64 including Swinton, Wath, Denaby Main, Conisbrough and Old Denaby.

Wath upon Dearne

S63 covering Wath, Brampton Bierlow, West Melton and Wombwell border.

Rawmarsh

S62 including Parkgate, Rawmarsh, Ryecroft and Greasbrough.

Brinsworth

S60 covering Brinsworth, Catcliffe, Treeton, Whiston and Canklow.

Also Covering

We regularly carry out EV charger installation work in Aston, Aughton, Swallownest, Dinnington, Thurcroft, Laughton-en-le-Morthen, Todwick, Wales, Kiveton Park, Harthill, Anston, North Anston, South Anston, Woodsetts, Firbeck, Tickhill, Bawtry, Crowle, Epworth, Mosborough, Waterthorpe, Beighton, Halfway, Killamarsh, Eckington, Chesterfield and Worksop. If you’re nearby and not sure whether we cover your postcode, just give us a ring on 07817 171954 — chances are we do.

Local knowledge matters. Being based in Rotherham means we know the housing stock around here inside out — the older ex-council terraces with aging Wylex boards, the 1970s Barratt estates with borrowed neutrals, the 2000s new-builds with dual RCD split-load boards. Local experience saves you time and money on every job.

Get a Free Quote Today

Fast response, honest pricing, fully certified work across Rotherham & South Yorkshire.

📞 Call 07817 171954Get a Free Quote

Frequently Asked Questions: EV Charger Installation FAQs

▶ How much does an EV charger installation cost?
A home EV charger installation typically costs £800–£1,200 including the charger and installation. Price depends on model, cable run, and whether your consumer unit needs upgrading.
▶ Do I need planning permission?
Usually not — most installations are covered under permitted development. Exceptions apply for listed buildings or conservation areas.
▶ How long does installation take?
Typically 2–4 hours. If your consumer unit needs upgrading or the cable run is long, it may take a full day.
▶ Can I charge from a normal socket?
You can, but it’s very slow and can overheat. A dedicated 7kW charger is 3–4x faster and designed for daily use.
▶ What brands do you install?
We install Easee, Ohme, Zappi, Andersen, and Wallbox. We can help you choose based on your vehicle and whether you have solar panels.
Scroll to Top