Emergency Electrician Rotherham

Electrical emergencies don’t wait for office hours. If you’ve lost power, you can smell burning, or there’s exposed wiring where a child or pet could reach it, you need a proper electrician on site quickly — not a voicemail and a callback next week.

MP Electrical & Renewable Energy Ltd offer rapid emergency electrical response across Rotherham, Sheffield, Doncaster, Barnsley and all the surrounding villages. Call 07817 171954 and you’ll speak directly to Mat — the electrician — not a call-centre.

When to Call Us Straight Away

• Burning smell from a socket, switch or consumer unit
• Scorch marks or discolouration around accessories
• Exposed live wires after damage, DIY or a failed fitting
• Total power loss where neighbours still have supply (your problem, not the network’s)
• RCD keeps tripping and won’t reset
• Shocks or tingles from taps, appliances or metalwork
• Water ingress into ceiling lights, sockets or consumer units
• Storm damage to outdoor wiring or meter tails

What We Do On Arrival

We make it safe first — isolate the faulty circuit, test for residual voltage, and protect any exposed conductors. Then we diagnose using proper test equipment (see our fault-finding page), carry out the minimum work needed to restore power safely, and give you a clear written quote for any follow-up work required before it goes ahead.

Common Electrical Emergencies We Handle

Every emergency call-out is different, but these are the situations we deal with most often across Rotherham and South Yorkshire:

Complete Power Loss

If your whole house has gone dark, the first thing to check is whether your neighbours are affected too. If they are, it is a supply issue — contact Northern Powergrid on 105. If only your property is affected, the fault is in your installation. Common causes include a failed main switch, a tripped RCD that will not reset, or a fault on the supply tails between the meter and the consumer unit. We carry full diagnostic equipment and stock the parts most likely to be needed, so the majority of these faults are resolved on the first visit.

Repeated RCD Tripping

An RCD that keeps tripping is doing its job — it is detecting a fault and disconnecting to protect you. But living without power to half your circuits is not practical. The fault could be a damaged cable, moisture in an outdoor socket, or a faulty appliance pulling the circuit down. We use insulation resistance testing and a process of elimination to isolate the faulty circuit, find the root cause, and fix it permanently rather than just resetting the trip.

Burning Smell or Scorch Marks

A burning smell from a socket, switch, or consumer unit is always urgent. It usually means a loose connection is generating heat, or a cable is overloaded. Left unchecked, this can cause a fire. If you notice this, switch off the affected circuit at the consumer unit immediately and call us. Do not attempt to remove the faceplate yourself.

Exposed Wiring

Whether from DIY work gone wrong, storm damage, or simple wear and tear, exposed live conductors are a serious shock risk — especially if children or pets are present. Cover the area with something non-conductive (a plastic chopping board or a dry towel) to prevent accidental contact, and call us straight away.

Electrical Shock from a Fitting or Appliance

If you have received a shock from a light switch, socket, tap, or appliance, stop using the affected circuit immediately. Even a minor tingle indicates a fault with earthing or bonding. This needs professional investigation to find out where the fault lies and to prevent a more serious shock.

What to Do While You Wait for Us

Electrical emergencies can be stressful. Here is how to keep everyone safe until we arrive:

• If there is a burning smell or smoke: Switch off the main switch on your consumer unit. If you cannot reach it safely, turn off the electricity at the meter if possible. If there is an active fire, get everyone out and call 999.
• If you have lost power: Check your consumer unit for tripped switches. If an RCD has tripped, try resetting it once. If it trips again immediately, leave it off — there is a fault that needs professional diagnosis.
• If there is exposed wiring: Keep people and pets away from the area. Do not touch the wires. Cover with a non-conductive material if possible.
• If someone has received a shock: Make sure they are no longer in contact with the source. Call 999 if they are unresponsive, have burns, or feel unwell.

Our Emergency Call-Out Process

When you call 07817 171954, here is what happens:

• Step 1 — You speak to Mat directly. No call centre, no waiting on hold. Describe the problem and we will give you immediate safety advice over the phone.
• Step 2 — We head to you. For genuine emergencies, we aim to be on site within the hour across the Rotherham area. We will give you a realistic arrival time so you are not left guessing.
• Step 3 — Diagnose and fix. We carry a fully stocked van with consumer units, RCDs, MCBs, cable, connectors, and test equipment. Most emergency faults are repaired on the first visit.
• Step 4 — Test and certify. Every repair is tested to BS 7671 standards. If we replace a consumer unit or carry out notifiable work, we issue the appropriate certificate through NAPIT.

Why Choose MP Electrical for Emergency Call-Outs?

• Direct line to the electrician: You speak to Mat, not a dispatcher. Faster communication means faster response.
• NAPIT-registered: All work meets the current edition of the Wiring Regulations (BS 7671:2018+A2:2022) and is certified through the NAPIT scheme.
• Fully stocked van: We carry the parts needed for the most common emergency repairs, so there is no second visit for materials.
• Clear communication: We explain exactly what we have found, what we have done, and whether any follow-up work is needed. No jargon, no pressure.
• Covering all of South Yorkshire: Rotherham, Sheffield, Doncaster, Barnsley and the surrounding villages. Local knowledge means we know the quickest routes to get to you.

Frequently Asked Questions

Areas We Cover for emergency electrical call-outs

MP Electrical & Renewable Energy Ltd is based in Rotherham and covers the whole of South Yorkshire and the surrounding region. Wherever you are, a local NAPIT-registered electrician is never far away.

Also Covering

We regularly carry out emergency electrical call-outs work in Aston, Aughton, Swallownest, Dinnington, Thurcroft, Laughton-en-le-Morthen, Todwick, Wales, Kiveton Park, Harthill, Anston, North Anston, South Anston, Woodsetts, Firbeck, Tickhill, Bawtry, Crowle, Epworth, Mosborough, Waterthorpe, Beighton, Halfway, Killamarsh, Eckington, Chesterfield and Worksop. If you’re nearby and not sure whether we cover your postcode, just give us a ring on 07817 171954 — chances are we do.

Related Services

You might also be interested in our electrical fault finding, fuse board replacements, EICR certificates.

Page last updated: 3 July 2026