EV Charger Installation in Rotherham

Switching to an electric vehicle is one of the best decisions you can make for your wallet and the environment — but charging at a public rapid charger every week quickly gets expensive and inconvenient. A dedicated home charger cuts your cost-per-mile dramatically and means you wake up every morning with a full battery.

MP Electrical & Renewable Energy Ltd are fully qualified, NAPIT-registered EV chargepoint installers based right here in Rotherham. Every installation is carried out to BS 7671:2018+A2:2022 and fully notified under Part P building regulations.

Watch Our EV Charger Installations

See how we install EV chargers for homeowners across Rotherham and South Yorkshire. Every installation is completed to the highest standard with OZEV-approved equipment.

Brands We Install

We’re approved to install every major domestic charger on the market, including Zappi (MyEnergi), Ohme, Easee, Wallbox, Hypervolt, EO, Project EV and Rolec. We’ll happily recommend the best unit for your driving pattern, solar setup and requirements rather than pushing a single brand.

What’s Included in a Standard Install

• Site survey and load assessment of your existing consumer unit
• Supply and fit of your chosen 7kW tethered or untethered chargepoint
• Type A RCD or RCBO protection with DC fault detection where required
• Cable run clipped or in trunking to keep things tidy
• Earthing upgrade or PEN fault device where needed
• Commissioning, testing and DNO notification
• NAPIT electrical installation certificate

Frequently Asked Questions

How long does installation take?

A standard install takes 3–5 hours. We aim to have you charging the same day.

Do I need planning permission?

No — domestic EV chargepoints are permitted development in almost all cases.

Is my fuse box compatible?

Older consumer units sometimes need upgrading. We’ll tell you honestly on the survey — see our fuse box upgrade page.

Do you cover my area?

Yes — we cover Rotherham, Sheffield, Doncaster, Barnsley, Wickersley, Maltby, Mexborough and all surrounding villages.

Home EV Charger Installation — How It Works

Getting a home charger fitted is simpler than most people expect. Here is what happens from your first call to charging your car:

• Step 1 — Survey: We visit your property to assess your electrical supply, consumer unit capacity, and the best route for the cable from your fuse box to your parking space. This is usually a quick visit and there is no obligation.
• Step 2 — Quote: Based on the survey, we provide a fixed quote with no hidden extras. The quote covers the charger unit, all cable and materials, installation labour, electrical testing, and NAPIT certification.
• Step 3 — Installation: Most domestic installations take between 3 and 5 hours. We install a dedicated circuit from your consumer unit, mount the charger, and run the cable through the most discreet route possible. If you need a mini pillar or ground-mounted post, we handle that too.
• Step 4 — Testing and handover: We test the full circuit to BS 7671 standards, register the installation with NAPIT, and walk you through the charger’s app and settings so you are confident using it from day one.

Do I Need a Consumer Unit Upgrade?

An EV charger draws a significant load — typically 7.4kW on a single-phase supply, which is a 32A circuit. If your consumer unit is an older rewireable fuse box or does not have space for an additional MCB and RCD, you may need an upgrade before the charger can be installed.

During our survey, we check:

• Whether your existing consumer unit has a spare way for the EV circuit
• Whether your main fuse (service cut-out) can support the additional load — most domestic supplies are rated at 60A or 100A
• Whether the earthing arrangement (TN-S, TN-C-S, or TT) is suitable for the charger you have chosen
• Whether the charger needs its own dedicated RCD or can share with existing circuits

If an upgrade is needed, we carry out the consumer unit replacement as part of the same job — you will not need to book a separate visit or find another electrician.

Workplace and Commercial EV Charger Installation

More businesses across Rotherham and South Yorkshire are installing EV chargers for staff, visitors, and fleet vehicles. Whether you need a single charger for a small office car park or a multi-point installation for a larger site, we handle the full project.

Commercial installations often involve:

• Load management: Multiple chargers sharing a limited supply using smart load balancing so they charge efficiently without overloading the building’s electrical system
• Three-phase installations: Faster 22kW chargers for commercial fleet vehicles that need to turnaround quickly
• Access control and billing: Chargers with RFID or app-based access so you can control who uses them and track energy consumption per vehicle or per user
• Cable management: Clean, compliant cable routes across car parks, with ground trenching or overhead cable tray depending on the site layout

We work with facilities managers, landlords, and business owners to design an installation that fits the site. All commercial work is tested to BS 7671, certified through NAPIT, and compliant with IET guidance on EV charging installations.

Smart Charging and Off-Peak Tariffs

Most modern EV chargers connect to your home Wi-Fi and come with a smartphone app. This gives you features that save real money:

• Scheduled charging: Set the charger to start at midnight when electricity rates drop — on an EV-specific tariff like Octopus Go or Intelligent Octopus, you could be paying as little as 7p per kWh instead of the standard rate
• Solar integration: If you have solar panels, chargers like the myenergi Zappi can use surplus solar generation to charge your car for free during the day
• Energy monitoring: Track exactly how much energy you are using for EV charging, which is useful for separating business mileage costs or keeping an eye on your electricity bill
• Charging limits: Set a maximum charge level (e.g. 80%) to preserve your battery’s long-term health

We set up your charger’s app and smart features as part of every installation, so you are saving money from the first charge.

Why Choose MP Electrical for EV Charger Installation?

• NAPIT-registered and experienced: We have installed EV chargers across Rotherham, Sheffield, Doncaster and Barnsley — from straightforward driveway installs to more complex detached garage and commercial setups
• Brand-agnostic: We install all major charger brands including myenergi Zappi, Hypervolt, Easee, Wallbox, Pod Point, and Andersen. We will recommend the best charger for your car, your supply, and your budget
• Fixed quotes with no surprises: The quote we give after the survey is the amount you pay. No hidden charges for cable length, trenching, or consumer unit work
• Full electrical capability: If your installation needs a consumer unit upgrade, earthing improvement, or additional circuits, we handle everything in-house
• Proper certification: Every installation is tested and certified through NAPIT, giving you peace of mind and protecting your home insurance

More EV Charger Questions

Areas We Cover for EV charger installation

MP Electrical & Renewable Energy Ltd is based in Rotherham and covers the whole of South Yorkshire and the surrounding region. Wherever you are, a local NAPIT-registered electrician is never far away.

Also Covering

We regularly carry out EV charger installation work in Aston, Aughton, Swallownest, Dinnington, Thurcroft, Laughton-en-le-Morthen, Todwick, Wales, Kiveton Park, Harthill, Anston, North Anston, South Anston, Woodsetts, Firbeck, Tickhill, Bawtry, Crowle, Epworth, Mosborough, Waterthorpe, Beighton, Halfway, Killamarsh, Eckington, Chesterfield and Worksop. If you’re nearby and not sure whether we cover your postcode, just give us a ring on 07817 171954 — chances are we do.

Related Services

You might also be interested in our solar, battery and EV solutions, garden office electrics, fuse board upgrades.

Page last updated: 3 July 2026