Electrical Fault Finding in Wickersley
MP Electrical provides professional electrical fault finding across Wickersley. When something isn’t working properly — lights flickering, sockets not working, circuits tripping intermittently, or unexplained power issues — we use calibrated test equipment to find exactly what’s wrong and fix it. No guesswork, no trial and error. Mat attends every job personally.
Common Electrical Faults in Wickersley Homes
Wickersley’s housing spans from the 1950s through the 1990s, with concentrations of 1960s and 70s builds around Bawtry Road, Morthen Road, and Larch Gardens. The type of fault we find depends on the age and history of the installation.
Intermittent Tripping
The most frustrating fault — a circuit that trips sometimes but not always. This usually means the fault is only present under certain conditions: when a specific appliance heats up, when humidity rises, when it rains, or when electrical load reaches a particular level. We use insulation resistance testing, earth loop impedance measurements, and RCD testing to isolate the fault systematically. In Wickersley’s 1960s and 70s properties, the most common cause is cable insulation that has deteriorated in specific sections — often where it passes through damp areas, near hot pipes, or where it’s been mechanically damaged at some point.
Dead Sockets or Circuits
When a socket, light, or entire circuit stops working completely, the fault is usually a broken conductor, a failed connection, or a tripped device in the consumer unit. We trace the circuit from the consumer unit to the fault location using a combination of visual inspection, continuity testing, and cable tracing equipment. In ring main circuits — the standard socket circuit in UK homes — a break in the ring often goes unnoticed until the load exceeds what a single leg can carry.
Flickering or Dimming Lights
Flickering lights can indicate loose connections, neutral faults, or supply issues. If it’s affecting multiple circuits or the whole house, the problem may be at the incoming supply or the main connections rather than in individual circuits. We test from the meter tails through the consumer unit and into each affected circuit to pinpoint the location.
Burning Smells or Hot Spots
A burning smell from any electrical fitting is urgent — it typically indicates a loose connection generating heat through arcing. We use thermal imaging and visual inspection to locate the overheating point. If you notice this, turn off the main switch and call us immediately.
Our Fault Finding Process
Electrical fault finding is a diagnostic process, not a guessing game. We use Megger multifunction testers — calibrated, professional equipment — to test insulation resistance on every circuit, earth continuity and earth loop impedance, RCD trip times and characteristics, polarity and correct connections, and voltage drop under load.
This systematic approach means we find the actual fault, not just the symptom. We’ve lost count of the times we’ve been called to properties where another electrician has replaced a component that wasn’t the problem — the fault was elsewhere in the circuit, and replacing the fitting just wasted money.
When Fault Finding Leads to Bigger Work
Sometimes fault finding reveals that the issue isn’t a single fault but a symptom of broader deterioration. If that’s the case, we’ll tell you honestly. An EICR in Wickersley will give you the full picture of your installation’s condition. If widespread deterioration is found, a rewire may be more cost-effective than chasing individual faults one at a time.
We’ll always explain the options and let you decide. No pressure, no unnecessary upselling.
What to Expect
When you call, Mat will ask about the symptoms to plan what test equipment to bring. On arrival, the diagnostic process begins at the consumer unit and works outward through the affected circuits. You’ll know what’s wrong, where the fault is, and what the repair costs before any work starts. Most faults are repaired in the same visit.
Why Wickersley Residents Trust MP Electrical
Over 310 five-star Google reviews. NAPIT registered. Professional Megger test equipment. Systematic diagnosis, not guesswork. Mat attends every job — no subcontractors.
Need Electrical Fault Finding in Wickersley?
Reply usually within 30 minutes.
Or call 07817 171954
Nearby Areas We Also Cover
As well as Wickersley, we provide fault finding in Bramley, Maltby, Rotherham, and across South Yorkshire. See our main electrical fault finding page for full details.
Why Choose MP Electrical?
Had work done by MP Electrical?
⭐ Leave Us a Google ReviewAreas We Cover
Page last updated: 7 July 2026